Laney AH300 AudioHub Multi Input Amplifier-15″ PA Speaker
All instruments welcome
The AH300 multi-input combo features 5 channels, 5-band graphic master EQ and Digital Delay and is designed to cater for a wide number of different instruments. Ideal for duo’s and medium sized gigs, or for bigger gigs it can be used as a personal monitor on stage! Its compact design is great for small stages and makes it easy to transport around. The AH300 delivers optimum performance, flexibility and sound quality for a wide array of audio inputs: Keyboards, E-drums, mics, acoustic and electric instruments and playback are all at home with the AH300 The principle behind the AH300 is simple: ALL INSTRUMENTS WELCOME!
DETAILS
FX loops are important as they allow you to add effects to the signal path in a specific place between the pre-amp and the output section on an amplifier. This is where FX loops are important as it allows you to put time-based FX after the distorted pre-amp section. For example, delayed distortion sounds different to distorted delay – try it.
The amplifier can be used in two orientations depending on the requirements. Rather than being used in the conventional upright mode, If the amplifier is to be used up close to the player, then the amplifier can be used in a “kicked back” orientation, meaning that the amps output is directed more towards a player’s ears.
Headphones socket with level control
The onboard digital effects have been custom designed by Laney. You have a choice of Reverb, Chorus, and Multi FX. Reverb positions have a variety of decay times from Plate through Rooms to Hall. Chorus positions have a various of Lengths/Delays & Multi FX have a different blend of Reverb/Chorus/Delay on each effects option.
KEY FEATURES
1 x 15” Custom woofer & HF Horn
XLR, jack and mini jack inputs
Line in
Line out
Master 5 Band Graphic EQ
Kick back format for personal monitoring
Great for gigs – 300 Watts
5 Channels – all instruments welcome
On-board Effects
FS1-MINI sold as accessory
FX Loop – insert type
https://youtu.be/c-R-bpVMuDs
Laney RB1 Richter 15W 1×8″ Bass Combo Amp
Solid bass performance
The RB1 is a super compact bass combo housing a custom designed 8″ driver but don’t let that fool you – it delivers a punchy 15 watts RMS of solid bass tone. The preamp features a powerful three band EQ, an on-board compressor and an internal limiter along with a MINI jack headphone socket and MINI input jack allowing connection of a media player to jam along with your favourite tracks. The RB1 features a dual-position cabinet design so can be used as a conventional stage combo or in ‘kickback’ position as a monitor.
Laney RB2 Richter Bass guitar combo – 30W – 10 inch woofer plus horn
Solid bass performance
The RB2 delivers 30 watts RMS of solid bass power. Coupled with both a 10” custom designed driver and a high frequency horn, the full range of bass tone can be heard with clarity and definition. The RB2 pre-amp features High and Normal jack inputs – catering for active and passive basses and a powerful 3 band EQ featuring a swept mid control making accurate tonal shaping a breeze. A switchable compressor adds instant punch. As well as headphone socket for silent practice and Aux input for audio playback, an XLR DI socket allows the RB2 to be connected directly to a PA system or recording console.
Laney Ritcher R410 Bass Cabinet 4×10″
SUPER-EFFICIENT BASS CABINET
This compact, high efficiency bass enclosure is designed to be the ideal extension cabinet for the Laney R500H. Designed for the bass player who wants more mid-range punch on stage the R410’s compact design makes it ideal for small stages and easy transport. Whatever your gig the R410 will deliver the performance you are looking for.
Laney Ritcher Bass R115 Bass Cabinet 1×15
Super-efficient bass cabinet
The R115 is a compact, high efficiency 1×15 bass enclosure and is the ideal extension cabinet to Laney R500H head and RICHTER combo models. Loaded with 1 x 15″ Custom Driver + Switchable HF horn and delivering 400 Watts @ 8 Ohms, the dual front-ported design delivers full, powerful bass tone.
Laney IRT-120H Ironheart 120W Tube Guitar Amp Head Black
The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.
One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.
FEATURES
- Footswitchable Pre Boost
- Three channels: Clean, Rhythm and Lead
- Class AB
- Bass, Middle and Treble with push-pull EQ shift on each channel
- FSR-IRT standard footswitch
- Variable FX loop
- Master Presence
- Laney designed digital reverb
- Two speaker connections
- Two 6L6 tubes
- Four ECC83 tubes
- 120W
Sinclair SCL2200 Bb Clarinet
Description
A standard “Bb” tenor saxophone for entry-level musicians. Yellow brass body. Includes Deluxe ABS case.
D’Addario EXL157 Nickel Wound Electric Guitar Strings, Baritone Light, 14-68
XL Nickel Wound electric guitar strings are the standard against which all other strings are measured. Our best-belling electric set, XL Nickel has been revered by players everywhere since 1974. Made with a high carbon steel core and nickel-plated steel wrap wire, XL Nickel strings have a bright, versatile tone, ideal for a wide variety of musical styles. This 14-68 Medium gauge set is designed for traditional long scale electric baritone guitars, such as B-tuned Danelectros.
XL Nickel Wound, D’Addario’s most popular electric guitar strings, are precision wound with nickel-plated steel onto a carefully drawn, hexagonally shaped, high carbon steel core. The result is strings with long lasting, distinctive bright tone and excellent intonation, ideal for the widest variety of guitars and musical styles.
– XL Nickel are our best-selling electric guitar strings, revered by players since 1974.
– Nickel-plated steel wrap wire provides a bright, versatile electric guitar tone, great for a variety of musical genres.
– Like all D’Addario electric guitar strings, XL Nickel are made with our proprietary Hex-Core, ensuring perfect intonation, consistent feel, and reliable durability.
– XL Nickel sets have a code on the recyclable VCI bag, which you can register to earn Players Circle points.
– XL Nickel electric guitar strings are made in the USA—drawn to our exacting specifications at our New York production facility.
Lanikai ACST-CEC Acoustic Electric Solid Acacia Top Concert Ukulele W/ Bag
Acacia Solid Top Concert A/E Ukulele
Rated 5.00 out of 5 based on 1customer rating
(1 customer review)
Features
-
Solid Acacia top, Acacia laminate back and sides
-
Chrome open back tuners for tuning accuracy and a light headstock for player comfort
-
Nubone XB® nut and saddle for maximum sustain and best tone
-
Wide nut and neck profile for player comfort (37.4mm nut width)
-
Chrome Strap Buttons for safety and comfort
-
Acacia is a beautifully grained wood that captures a traditional ukulele tone and look.
-
Cutaway with a Fishman® Kula preamp and tuner
-
Single-Ply Natural Maple fingerboard binding / black dots
-
D’Addario® EJ88 strings standard for tone and reliability
-
8 hole no tie bridge for easy string changes
-
Rosette Maple single band inlay
-
Includes 10mm Lanikai padded gig bag
-
Limited Lifetime Warranty
Lanikai CDST-C Cedar Solid Top Concert Ukulele
Cedar Solid Top Concert Ukulele
Features
-
Solid Cedar top, Mahagony laminate back and sides, with a smooth satin finish
- Maple binding with wood purfling
-
Deluxe Grover® chrome open back tuners for tuning accuracy and keeping the headstock light for player comfort
-
NuBone XB® nut and saddle for maximum sustain and best tone
-
Wide nut and neck profile for player comfort (37.4mm nut width)
-
Chrome Strap Buttons are standard for convenience, safety and comfort
-
The Solid Cedar Top delivers a warm clearly defined tone with projection
-
Acoustic no cutaway
-
Includes 10mm Lanikai padded gig bag
-
Limited Lifetime Warranty
Lanikai OA-EBU Oak Bass Acoustic / Electric Ukulele, Satin
Oak Bass A/E Ukulele
Features
-
Oak laminate top, back and sides in Satin finish
-
Black open back tuners for tuning accuracy and keeping the headstock light for player comfort
-
Graphtech nut and saddle for better tone and projection
-
Fishman® Clásica II preamp with tuner
-
Truss Rod for easy neck adjustments
-
Wide nut and neck profile for player comfort
-
Strap Buttons are standard for convenience, safety and comfort
-
Triple matched grain (top, back and sides) has premium build quality and stunning visual details
-
Includes Lanikai 10mm padded gig bag
-
Limited Lifetime Warranty