Orange Fur Coat Vintage Fuzz w/Adjustable Octave
VINTAGE FUZZ
Loosely based on the vintage Foxx Tone Machine, the Orange Fur Coat Fuzz takes its inspiration from the great fuzz pedals of the 70’s.
The Fur Coat gives you a fully controllable octave fuzz pedal. Separate switches mean you can choose between Fuzz or Octave Fuzz. The controllable Octave up fuzz means you can bring in the fuzz to whatever level you need and the EQ allows you to boost your Treble or Bass. This truly is a fuzz you control.
This is our only True Bypass pedal. This is because a Fuzz is better at the beginning of the chain where it interacts directly with your guitar. Placing the pedal further into your signal chain or after a buffer will give the fuzz a more distorted tone.
VINTAGE FUZZ:
The Orange Fur Coat fuzz can be used into a clean amp or an amp with some hair. When used into an overdriven amp, it creates a unique, thick “fur coat” of vintage fuzz.
ADJUSTABLE OCTAVE:
Something quite rare, rather than simply being able to switch it on/off, the Fur Coat adds octave up as you increase the octave control.
LOW POWER CONSUMPTION:
The Orange Fur Coat fuzz draws very little current (much less than 10mA) allowing for long battery life. Use a regulated 9-12V DC centre-negative power supply.
CONTROLS (LEFT TO RIGHT):
VOLUME, EQ, OCTAVE, FUZZ
CURRENT DRAW:
9V: 3MA
12V: 5MA
STOMP FUNCTIONS:
ACTIVATE OCTAVE, ACTIVATE FUZZ
UNBOXED DIMENSIONS (W X L X H):
9.5 × 6.5 × 13CM (3.7 X 2.6 X 5.1″)
UNBOXED WEIGHT:
524G (1.15 LBS)
BOXED DIMENSIONS (W X L X H):
11.4CM X 14.8CM X 8CM
BOXED WEIGHT:
722G (1.59LB)
Laney GS412IA 240W 4×12 Guitar Speaker Cab
A MONSTER CABINET
The Laney GS412IA is a monster cabinet loaded with 4×12” HH Custom designed drivers. This closed-back speaker cabinet utilises time tested construction methods to deliver the bass, mid response and great sound you would expect from a Laney 4×12 cab. The HH 12″ drivers (16 ohms) deliver a strong, aggressive low-end and powerful low-mids along with an attacking upper mid-range and crystal-clear top- end. The GS412IA delivers a clean warm tone, beautiful crunch tones and all out aggression without unwanted coloration. This GS412IA is ideal for any Laney guitar head but can be used with any good quality guitar head of your choice. As with all Laney cabinets, the GS412IA features high quality fixtures such as metal castors and ergonomic grab handles and is designed to withstand the rigours of life on the road.
KEY FEATURES
4 x 12″ Custom Designed HH Drivers
320 Watts RMS power handling
16 Ohm Impedance
Rugged Plywood Construction
Ergonomic comfortable bar handles
Metal Castors
Castor cups
Rubber feet
Black Metal Corners
6.3mm Mono input jack socket
6.3mm Mono link jack socket
https://youtu.be/csgi5UmU1Uc
Simon & Patrick 052042 Songsmith Dreadnought Acoustic 6 String Guitar w/Presys II Electronics
Simon & Patrick 052042 Songsmith Dreadnought Acoustic 6 String Guitar w/Presys II Electronics
With a very responsive and extremely well balanced dreadnought sound, the Songsmith is an honest and true acoustic guitar. With a Varnish Burst finish and a select pressure tested solid top, its sound (as with all S&P models) will only get better the more the guitar is played over time.
Specs
Back & Sides : Red Wild Cherry
Top : Spruce (Select Pressure Tested Solid Top)
Fingerboard & Bridge : Rosewood
Finish : Semi Gloss Varnish Burst Finish
Tusq nut & saddle by Graphtech
Proudly made in Canada.
Simon and Patrick 030088 Songsmith Dreadnought – Burst
With a very responsive and extremely well balanced dreadnought sound, the Songsmith is an honest and true acoustic guitar. With a Varnish Burst finish and a select pressure tested solid top, its sound (as with all S&P models) will only get better the more the guitar is played over time.
Specs
Back & Sides : Red Wild Cherry
Top : Spruce (Select Pressure Tested Solid Top)
Fingerboard & Bridge : Rosewood
Finish : Semi Gloss Varnish Burst Finish
Tusq nut & saddle by Graphtech
Proudly made in Canada.
Ping P2654A Machine Heads 3+3 Sealed Gear Chrome
- Venetian Button Individual Chrome 3+3
- Venetian button style, highest precision, non-slipping tuning capability. 14 to 1 gear ratio. tension screw adjustment for turning tension. hex-threaded busings and mounting screws.
Gibraltar SC-CLRA Cymbal L-Arm Rachet Assembly
SC-CLRA
Cymbal L-Arm Ratchet Assembly
– 12.7mm cymbal L-arm, with twin ratchet
– 4″ knurled section
– 4″ vertical cymbal section
– Mounts to cymbal boom (1/pack)
Joyo JF-328 Nebulous Phase Mini Guitar Effect Pedal
JOYO JF-328 Nebulous Phase mini Guitar Effect Pedal
The JOYO JF-328 Nebulous Phase mini Guitar Effect Pedal has landed and what a JOY-o it has been trying it out.
The nebulous phaser splits the audio signal into 2 separate paths. One is unaffected while the other passes through 4 all pass filters and a LFO (Low Frequency Oscillator), these two signals are then mixed back together. As the Nebulous has 4 of these all pass filter it makes it a 4stage phaser, just like a certain orange ancestor ;). The phase filters the guitar signal by creating a series of peaks and troughs in the frequency spectrum. The position of the peaks and troughs of the waveform being affected is then modulated, adjusting speed, width and feedback. The phase effect varies over different times, adjusting the phase width (the gap between the peaks), creates a sweeping effect that can sometimes be confused with flanger..
As well as the plethora of 70’s rock, funk and pop recordings, phase is commonly found on 70s keyboards and remains a classic effect. We got great results placing the nebulous phase after the molo tremolo, something oscillating before adjusting the volume. Using the shape shifting molo trem, you will be creating anything from a subtle modulated effect to widen your girth, or something that will take you out of this world..
Listen to Small Faces, Brian May, Radiohead, Eddie Van Halen.
and watch the demo.
Joyo JF-301 Boost Clean Booster Ironman Mini Series
JOYO JF-301 Rated Clean Boost Ironman Mini Guitar Effects Pedal
The Joyo Rated Boost JF-301 is part of the highly rated JOYO Ironman series, well built tiny tone machines that are guaranteed to surprise with their sound quality and affordability. With ±12dB boost range and active low/high it is perfect for a little extra volume or gain on tap!
The Joyo JF-301 Rated Boost is here to push your amp to beautiful overdriven overtones while maintaining your guitar’s inherent natural sound.
Dial in crystal clear volume or add a little dirt and EQ to take it up a notch for your tasty solo.
One special feature of the Ironman series is the cover that flips over the controls to protect your carefully dialed in settings from getting changed accidentally. Set it and forget it! A nice little bonus is the LED light glows through the cover when engaged for a cool visual effect.
True Bypass Clean Boost
Output volume control
Gain Control
High frequency EQ control
Low Frequency EQ control
Specifications:
Input Impedance:1M
Output Impedance:10K
Running Current 18mA
Power:DC 9V adapter (negative polarity)
Dimensions 73(L) * 43(W)* 50(H)mm
Plug in 9v DC Adapter (not included)
Alto ZMX862 6-Channel Compact Mixer
Professional-Grade Mixing With a Small Footprint
The ZMX862 is a 6-channel, 2-bus mixer with the right amount of inputs, outputs, routing, and EQ for more intimate live performance reinforcement situations. Features two microphone inputs, each with with Phantom Power, the ZMX862 also has a three-band EQ, two aux sends per-channel for external effects and monitoring, and even two track inputs for things such as audio playback. The ZMX862 is a perfect, take-anywhere professional mixer.
Versatile Inputs and Outputs
The ZMX862 is a step up from our massively popular ZMX52 that adds more inputs and an extra band of EQ as well as a switch for phantom power. Not only can you plug dynamic, condenser, and wireless microphones into the first two channels, you also get two stereo channel inputs for keyboards, drum machines, and other instruments. Plus, you can easily plug in your MP3 player, CD player, or audio from a DVD player into the CD/TAPE inputs. But, you also have two AUX sends that you can use to send streams of audio from your mixer to a digital effects unit, stage monitor, or any number of destinations. Choose the ZMX862 as the audio central command for your live performances, home studio, or video suite and be ready for any audio curveball.
High Headroom, Low Noise
Just because the ZMX862 is compact, portable and affordable doesn’t mean you have to make sacrifices. This compact mixer brings the same standard of quality to your performances as our top-of-the-line models. All Alto Professional ZMX mixers are designed with high headroom and ultra low-noise, discrete mic preamps so you always get the full dynamic range of your mix every time. Pristine sound. No compromises.
Visualize Your Mix
We designed every ZMX mixer with your performance in mind. Sometimes venues are dark and it can be hard to see what you’re working with. Alto Professional solves this problem by not only color coding each section of the mixer, but also by using brightly colored knobs so that you can easily find what you need to adjust before you ever lay a finger on the mixer. Our blue, red, yellow and white pots are instantly easy to identify in dim lighting. LED indicators for output level, peak, and phantom power also assist in making sure that you have multiple visual cues that compliment everything you’re hearing.
TECH INFORMATION
Input Channels: Mono channels (Ch. 1 – 2)
Microphone Input: Electronically balanced, discrete input configuration
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ≦0.005% at +4 dBu, 1 kHz
Gain range: 0 dB to 50 dB (Mic)
Maximum Voltage Gain: 70 dB Ch. Mic Input→Main MIx out & Tape out, 80 dB Ch. Mic input→Control room & Phones, 60 dB Ch. Mic input→Aux send
SNR (Signal to Noise Ratio): ≧110 dBu
Phantom power (Mic Pin 2 / Pin 3 and Pin 1): +48 V – with switch control
Line Input: Electronically Balanced
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ≦0.005% at + 4 dBu, 1 kHz
Gain Range: 15 dBu to 35 dBu
Stereo Channels: (Ch. 3 – 6)
Line Input: Electronically Balanced
SNR (Signal to Noise Ratio): ≧110 dBu
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ≦0.005% at + 4 dBu, 1 kHz
Gain range: -20 dBu to +20 dBu, 60 dB Ch. Line → Main Mix out
Maximum Voltage Gain: 20 dB FX return → Main Mix out, 20 dB RCA Tape input → Main Mix out
Impedance
Microphone Input: 3.9 kOhms
All Other Inputs: 10 kOhms or greater
Tape Out: 1 kOhms
All Other Outputs: 120 Ohms
Equalization
Mono Channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz
Stereo Channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz
Main Mix Section
Tape, Aux, Phones Output
Output level: 0 dBu Unbalanced, 1/4″ jacks, Max out +22 dBu Unbalanced, 1/4″ jacks noise (Bus Noise): ≦-90 dB @ 20 Hz – 22 kHz (channel & Main level at 0 dB, other at minimum, DSP mute)
Power supply: 18 V, 1500 mA
Rated Power Consumption: 18 W
Dimensions (WxLxH): 202mm x 250mm x 58mm
Weight: 3.75 lb
Focusrite Scarlett 2i2 3rd Gen 2 In /2 Out USB Recording Interface
Description
THE WORLD’S BEST SELLING AUDIO INTERFACE Scarlett has gone platinum. Sitting on the desks of a huge global community of musicians, producers and home-recordists, the iconic 2i2 has already helped make more records than any other interface in history. And with the 3rd Generation, you’re going to sound better than ever. YOUR MUSIC, WRITE AWAY Scarlett’s best-selling interface – millions of musicians use 2i2 to write and record every day. Featuring natural sounding 3rd Gen mic preamps, and Air, emulating our original ISA preamps, 2i2 is getting musicians the most from their mics everywhere, all the time. It’s like writing in a studio. THE BEST SOUNDING, EASILY Getting studio quality recordings at home has never been easier. Quick Start gets you set up, recording and playing back within minutes. Our mic preamps, high-headroom instrument inputs and now-iconic Gain Halos mean the science of sounding great is sorted. We’ve worried about the tech, you can focus on the music. YOUR RECORDING IS 30 YEARS IN THE MAKING We’ve been making mic preamps for 30 years, and the 3rd Gen mic pre is the best Scarlett has ever heard. The 24-bit/192kHz converters give your recordings clarity and detail. Air mode breathes life into vocals, adding unique high-end detail. Our decades of experience mean Scarlett sounds just like you. OUR TECHNOLOGY IS SOUND Incredibly reliable, Focusrite hardware won’t let you down. If, however, you come across a problem you can rely on our global support team and your two-year warranty to get it sorted. Sound
- Two of the best performing Scarlett mic preamps the range has ever heard – now with Air – for miking up guitars or recording vocals
- Two high headroom instrument inputs, for plugging your guitar or bass straight in
- High-performance converters, allowing you to record, mix and play back audio in studio quality, anywhere
- Quick Start tool, making it easier than ever to get up and running
Focusrite SCARLETT-4I4-3RD-GEN 4 In /4 Out USB Recording Interface
Description
EXPAND YOUR SETUP WITH EXTRA CONNECTIVITY Sitting on the desks of more musicians and producers than any other, the Scarlett range of audio interfaces means studio-quality sound for all your instruments – and 4i4 is the interface of more. Capture more of your ever-expanding setup with more inputs, more outputs and more connectivity. EXTENDED PLAY Plug in and produce; all your instruments, all the time. With two 3rd Generation preamps, four line-ins and four balanced outs – for synths, drum machines or looping hardware effects – our most connected bus-powered interface records wherever your instruments are. Spend less time plugging in and more time playing. THIS IS YOUR CUE Focusrite Control makes it simple to route your audio and cue mix, loopback and monitor mixes, from your Mac®, PC, iPad®, iPhone® or iPod touch®. Send, stream, sample – simple. THE BEST SOUNDING, EASILY Quick Start gets you set up, recording and playing back within minutes. Our mic preamps, high-headroom instrument inputs, iconic Gain Halos, clean and balanced fixed line I/O and MIDI connectivity mean the science of sounding great is sorted. We’ve worried about the tech, you can focus on the music. YOUR TRACKS ARE 30 YEARS IN THE MAKING We’ve been making mic preamps for 30 years, and the 3rd Gen mic pre is the best Scarlett has ever heard. The 24-bit/192kHz converters give your recordings clarity and detail. Air mode breathes life into vocals, adding unique high-end detail. Our decades of experience mean Scarlett sounds just like you. OUR TECHNOLOGY IS SOUND Incredibly reliable, Focusrite hardware won’t let you down. If, however, you come across a problem you can rely on our global support team and your two-year warranty to get it sorted. Sound.
- Four balanced line inputs, for connecting synths or other line-level audio, and four balanced outputs, for monitoring and effects sends
- Two of the best performing Scarlett mic preamps the range has ever heard – now with Air – for miking up guitars or recording vocals
- Two high headroom instrument inputs, for plugging your guitar or bass straight in
- Loopback, for grabbing a stereo feed of any combination of hardware inputs and software playback, no cables needed, for simple sampling, streaming or podcasting
Presonus AudioBox iTwo USB 2.0 & iPad Recording Interface
Description
Everything you need to record and produce on the go. Record wherever inspiration strikes with this complete, all-PreSonus package! Featuring multiplatform, bus-powered AudioBox iTwo audio/MIDI interface and award-winning Studio One recording and production software, PreSonus AudioBox® iTwo Studio includes everything you need to record demos, rehearsal sessions, podcasts, sound effects for video, and your next hit record. AudioBox iTwo: The interface for producers on the go. The AudioBox iTwo is our most versatile bus-powered audio/MIDI interface, providing two combo mic and switchable line/instrument inputs with a high-performance mic preamplifier. In the studio or in the field, it’s great for recording synths, guitars, and anything you can capture with mics. Compact and ruggedly built, AudioBox iTwo is a complete solution for mobile musicians, sound designers, and podcasters. Read more about the AudioBox iTwo. Studio One 3 Artist makes recording a breeze. No other entry-level recording and production software is this easy to learn and use, yet is capable of creating studio-quality output. Studio One® 3 Artist lets you work quickly and stay focused on your inspiration, offers unlimited tracks and plug-ins, and delivers features not normally found in entry-level DAWs. Access powerful editing tools without wading through menus. Load and save audio clips, MIDI files, and effects by drag-and-drop. Studio One makes it easy! Read more about Studio One 3 Artist. Record on the go with Capture Duo for iPad Based on Capture™ live-recording software for StudioLive® mixers, Capture Duo lets you record two stereo tracks with up to 24-bit, 96 kHz fidelity using the AudioBox iTwo, another MFi audio interface for iPad, or the iPad’s built-in mics. You can wirelessly transfer recordings directly from Capture Duo to a Mac or PC running Studio One, then edit, sweeten, overdub, and mix with the power of a world-class DAW. If two tracks aren’t enough, purchase the low-cost, 32-track C
- Core Technology
- Studio One Artist DAW for Mac and Windows
- Capture Duo Recording Software for iPad (free from the Apple App Store)
- M7 Microphone
- HD7 Headphones
- Nimbit Free Direct-to-Fan Marketing and Promotion
- Our best-selling Scarlett USB interface, featuring two of the best performing Scarlett mic preamps the range has ever heard – now with Air.
- CM25 MkIII condenser microphone, for making detailed studio-quality recordings.
- HP60 MkIII professional closed-back headphones, for clear and comfortable audio playback, mixing and monitoring.
- XLR and USB cables in the box, no power supply needed. Unpack, plug in, record.
P-K372 Knob-Blackw/White Line, Silver Top, Set Screw, 6.4mm Inset, Diameter: 1″
Black knob with white line, silver top, set screw and brass insert. Fits ¼” shaft with set screw
Tascam US-4X4-CU 4-in/4-out Audio/MIDI Interface with HDDA Mic Preamps and iOS Compatibility
Tascam US-4X4-CU 4-in/4-out Audio/MIDI Interface with HDDA Mic Preamps and iOS Compatibility
Description
TASCAM’s US-4×4 combines great audio quality and ergonomic design for a powerful 4-in/4-out USB 2 audio interface. Four of TASCAM’s Ultra-HDDA mic/line preamps provide up to 57dB of gain with nearly inaudible noise and distortion specs. The audio design features high-performance, musical components like NE5532 op amps for rich sound quality without coloring the source. The US-4×4 includes class-compliant drivers for plug-and-play operation on Mac OSX and iOS devices like the iPad, and a simple driver adds ASIO compatibility for Windows. MIDI in and out are also included for connecting synths, drum machines, and controllers. The interface also includes a copy of Steinberg Cubase LE for Windows and Mac. With solid audio specs, iOS compatibility, and an easy-to-read angled design, the US-4×4 is the ultimate 4-channel interface for home, project, and mobile studios.
- Four Ultra-HDDA mic preamplifiers
- Four XLR or TRS (MIC/LINE) inputs with full +48V phantom power
- Four TRS analog balanced outputs
- Two headphone outputs – each with 45mW/ch output power
- Dedicated AC adapter is included
Focusrite Scarlett 2i2 Studio 2 In/2 Out USB Recording Recording Bundle w/ Headphones and Condenser Microphone
Description
EVERYTHING YOU NEED TO RECORD AT HOME Sitting on the desks of a huge global community of musicians, producers and home-recordists, the iconic 2i2 has already helped make more records than any other interface in history. Featuring a mic, headphones and all the cables, Scarlett 2i2 Studio is everything you need to create studio-quality recordings at home. THE COMPLETE HOME RECORDING STUDIO Scarlett’s best-selling interface, millions of musicians use 2i2 to write and record every day. Featuring natural sounding 3rd Generation mic preamps, and Air, emulating our original ISA preamps, 2i2 is getting musicians the most from their mics everywhere, all the time. It’s like writing in a studio. THE BEST SOUNDING, EASILY Quick Start gets you set up and recording within minutes. Your CM25 MkIII mic captures every detail. Your HP60 MkIII headphones mean clear and comfortable mixing and monitoring. 3rd Gen mic preamps, high-headroom instrument input and now-iconic gain halos mean the science of sounding great is sorted. We’ve worried about the tech, you can focus on the music. YOUR RECORDING IS 30 YEARS IN THE MAKING We’ve been making mic preamps for 30 years, and the 3rd Gen mic pre is the best Scarlett has ever heard. The 24-bit/192kHz converters give your recordings clarity and detail. Air mode breathes life into vocals, adding unique high-end detail. Our decades of experience mean Scarlett sounds just like you.
- Our best-selling Scarlett USB interface, featuring two of the best performing Scarlett mic preamps the range has ever heard – now with Air.
- CM25 MkIII condenser microphone, for making detailed studio-quality recordings.
- HP60 MkIII professional closed-back headphones, for clear and comfortable audio playback, mixing and monitoring.
- XLR and USB cables in the box, no power supply needed. Unpack, plug in, record.
CIOKS C8e Power Supply Expander w/8 Isolated Outputs including 24VDC
CIOKS 8 is our largest switch-mode power supply expander and it features 8 isolated outlets which each deliver 9V DC at 660mA. All outlets offer four selectable voltages (9, 12, 15 or 18V).
The CIOKS 8 was mainly designed to be used as a large extension to the DC7 power supply in case you need more outlets. If you want to use CIOKS 8 as an extension to the DC7, simply connect CIOKS 8 to the courtesy 24V outlet on your DC7 with the included 24V DC Link cable and you are good to go.
If you are looking for a super powerful power supply setup to power a large pedalboard, the combination of CIOKS DC7 and CIOKS 8 will definitely be an awesome solution where this combo will give you 15 isolated outlets in total plus a 5V USB outlet to charge your smartphone or tablet.
K&M 19665-BLACK Black Flange Adapter for 21420 -25mm with 4×6.5mm Plate
Suitable for 21420 or stands with tubing diameter of 25 mm. Designed to be inserted and screwed onto speaker enclosures. Plastic-coated steel flange, diameter 105 mm, depth 78 mm.
Product data
Bore holes:
diameter 6.5 mm (4 x)
EAN:
4016842106899
Function:
to screw into speaker, to slip on stand
Material:
steel
Suitable for tubing diameter of:
25 mm
Type:
black
Weight:
0.38 kg
K&M 210/2-BLACK Boom Microphone Stand The industry standard; stable and sturdy; zinc die-cast base; designed for heavy use.
Product data
Boom arm:
one-piece design
Boom arm clamping:
T-bar locking screw
Boom arm length:
800 mm
EAN:
4016842212200
Height:
from 900 to 1,605 mm
Height adjustment:
clutch
Leg construction:
socket with foldable legs
Material:
steel
Product Category:
Topline
Rod combination:
2-piece folding design
Size when folded:
105 x 85 x 960 mm
Special features:
the industry standard; stable and sturdy; zinc die-cast base; designed for heavy use
Threaded connector:
3/8″
Type:
black
Weight:
3.13 kg
