Shure MV7-S XLR/USB Podcasting Microphone-Silver
Inspired by the legendary SM7B, the MV7 is a dynamic microphone with both USB and XLR outputs for use with computers and professional interfaces alike. Connect via USB and explore additional set-up features and Auto Level Mode within our ShurePlus™ MOTIV app, to control your vocal tone, and distance from the microphone. With Auto Level Mode, you can let the microphone do the work for you.
Shure MV7-K XLR/USB Podcasting Microphone-Black
Inspired by the legendary SM7B, the MV7 is a dynamic microphone with both USB and XLR outputs for use with computers and professional interfaces alike. Connect via USB and explore additional set-up features and Auto Level Mode within our ShurePlus™ MOTIV app, to control your vocal tone, and distance from the microphone. With Auto Level Mode, you can let the microphone do the work for you.
Digiflex NPP-SILENT-10, 10ft NK1/6 Patch Cable -Silent Phone Connectors
Professional Touring Series instrument cables with a low profile Right Angle Neutrik SILENT plug to eliminates pops and crackles when unplugging instruments. A 20 gauge centre core with 41 strands of pure copper ensure a clean signal with a wide frequency response. A double shield design blocks noise and eliminates handling noise that can plague cheap cables. Neutrik X Series slim connectors ensure a reliable connection every time.
Digiflex NKXM-10 10ft XLR M / 1/8″ TRS | Balanced XLR to portable recording device
Tour Series 1/8″ mini TRS to male XLR cable, made with NK2/6 cable and Neutrik connectors. To plug your portable device into a mixer or other balanced input, with mono summing of the channels.
Cable
Connector A
Connector B
Digiflex NKXM-6 6ft XLR M / 1/8″ TRS | Balanced XLR to portable recording device
Tour Series 1/8″ mini TRS to male XLR cable, made with NK2/6 cable and Neutrik connectors. To plug your portable device into a mixer or other balanced input, with mono summing of the channels.
Cable
Connector A
Connector B
Digiflex NKXM-3 3ft XLR M / 1/8″ TRS | Balanced XLR to portable recording device
Tour Series 1/8″ mini TRS to male XLR cable, made with NK2/6 cable and Neutrik connectors. To plug your portable device into a mixer or other balanced input, with mono summing of the channels.
Cable
Connector A
Connector B
COOL Cool Cell Pick 100% Celluloid w/ “Cool Cell Rubberized Accu-Grip” RCC-Single
Project Description
WITH A “COOLCELL RUBBERIZED GRIP ™
100% CELLULOID AND THE DISPLAY COMES WITH 300 PICKS
ACROSS THE 3 MOST POPULAR GAUGES.
0.50, 0.75, 1.00
COOLCELL® RUBBERIZED ACCU-GRIP PICK ™
For many years, celluloid has been the choice of guitarists worldwide. Most have used them in a dark tortoise shell color with a popular guitar manufacturer’s logo on it. Our COOLCELLpicks are made of 100% celluloid in a white mother of pearl shell coloring. Our goal was to make a celluloid pick which would offer the guitarist as much gripping power
as they need at any time during a performance. Not too little, not too much, but just enough without getting in the way.
We at cool music know that no two guitarists are alike and that is why the revolutionary COOLCELL Rubberized Accu-Grip™ pick was created. It is truly a smart guitar pick. This pick design actually will change its gripping texture to give the dry, wet, or even slimy fingered guitarist the proper grip at all times. No matter how bad your flop-sweat or nerves on that special gig may be, you will not lose your pick while playing those super fast cool lead lines.
If you are now playing another celluloid pick, you owe it to yourself to… “TRY THIS PICK”!!!
It is important for you to realize that this pick will actually change its feel dynamically as you need it! While you play!
That is, if you start playing dry and end your song or set with moist fingers the pick will get grippier as you need it.
Now that’s cool!
The Secret:
This pick’s texture is a micro-porous and slightly nubby heat sensitive rubberized compound. This patented compound mixture is applied to the pick using a special cryogenic process. This application process allows the COOLCELL™ pick to successfully morph from a very smooth slightly nubby surface (cool environments) to a very grippy softer and stickier grip (hot or wet environments) This cryo- process allows the pick to continue to change from hot to cold and back again without distorting the nubby texture or compromising the overall sound of the pick.
Lakland Skyline 55-02 Deluxe 5-String Bass Guitar with Maple Fingerboard
SKYLINE SERIES 55-02
Seen on the world’s largest stages, the 55-02 has an active punch that will drive your sound clearly through any mix, with ‘best in class’ tonality for a versatile and refined fit for any playing situation.
- Features 35″ scale neck for better B string tone and tight, deep bottom
- Features Lakland hand-wound LH3 pickups and onboard preamp
- Available in Deluxe and Custom models
The LH3 pickups (wound in our shop in Chicago) and onboard preamp are the same components you’ll find in our legendary USA Series 55-94. (powered by a single 9-volt battery that can be changed by removing a simple snap-on battery cover – no screws to lose!) Internal dip switches let you select the midrange boost/cut frequency.
The neck is the same 35” scale, profile and spec as our USA series 55-94 which has won over legions of professionals because of its great feel, string spacing and most importantly, a B string with tight punchy clarity that lives with the other 4 strings in perfect harmony.
Deluxe Model – The 55-02 Deluxe adds a Quilted Maple veneer natural finish top as well as an Indian Laurel fingerboard.
Custom Model – All the same great attributes as the 55-02 but now available in the following custom color and fingerboard options:
- Pearl White with matching headstock color and a bound Maple fingerboard with pearl block inlays.
- Ice Blue Metallic with matching headstock color and an un-bound Maple fingerboard with Pearl and Abalone block inlays.
QSC KW153 3-way powered loudspeaker with a 15″ LF, 6.5″ MF and a 1.75″ diaphragm compression driver
QSC KW153 3-way powered loudspeaker with a 15″ LF, 6.5″ MF and a 1.75″ diaphragm compression driver
Features
- 15-inch woofer; 6.5-inch midrange woofer; 1.75-inch diaphragm compression driver
- 75° conical DMT coverage
- Maximum SPL 134 dB peak
- 1000-watt Class D power modules in all models (2 × 500 W continuous)
- Onboard mixer with two combo XLR and ¼⁻ᶦⁿᶜʰ inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
- Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance
- DMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound field
- Rugged, texture-painted birch enclosures
- Four-position Mic/Line gain
- Tour-grade 16 gauge steel grilles
- Comfortable ergonomic handles
- 35 mm standard (non-tilt) pole socket
- M10 rigging points for suspended installation
SPECIFICATIONS
KW153
Configuration
15-inch 3-way trapezoidal
Transducers
Low-frequency
Mid-frequency
High-frequency
15-inch cone transducer
6.5-inch mid range cone transducer
1.75-inch diaphragm compression driver
Frequency Response (-6 dB)
35 Hz to 18 kHz
Frequency Range (-10 dB)
33 Hz to 20 kHz
Nominal Coverage (-6 dB)
75° axisymmetric
Maximum SPL1
134 dB peak
Amplifier
Power Output2
1000 W Class D (500 W LF + 500 W MF/HF) continuous
2000 W peak
Input Impedance
Channel A XLR / ¼⁻ᶦⁿᶜʰ:
Mic gain setting
Balanced
Unbalanced
0 dB
38 kΩ
19 kΩ
+12 dB
10 kΩ
5 kΩ
+24 dB
2.66 kΩ
1.33 kΩ
+36 dB
660Ω
330Ω
Channel B XLR / ¼⁻ᶦⁿᶜʰ: 38 kΩ balanced / 19 kΩ unbalanced
Channel B RCA: 10 kΩ
Controls
Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators
Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
Connectors
Balanced female XLR/¼⁻ᶦⁿᶜʰ line/mic level input, Balanced female XLR/¼⁻ᶦⁿᶜʰ line level input, Dual Balanced male XLR full range line level out , Balanced male XLR “mix” out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling
On demand, 50 mm variable speed fan
Amplifier Protection
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection
Thermal limiting, excursion limiting
AC Power Input
Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption
(1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material
15 mm painted birch plywood
Finish
Black textured paint
Grille
Black powder coated 16 gauge steel
Speaker Dimensions (H×W×D)
1094 × 470 × 427 mm
43.1 × 18.5 × 16.8 in
Carton Dimensions (H×W×D)
580 × 560 × 1168 mm
22.8 × 22 × 46 in
Net Weight
39.5 kg / 87 lb
Shipping Weight
47.6 kg / 104.9 lb
Available Accessories
KW153 cover, KW M10 kit
All specifications are subject to change without notice.
QSC KS118-COVER Nylon padded cover with grill guard for KS118.
Features
Soft cover made with heavy-duty Nylon/Cordura® material for the KS118 with grille guard.
QSC KS118 18″ powered subwoofer with four (4) heavy-duty casters.
Features
- Very high output with impressive low frequency performance
- 3600 Watt Class D amplifier module
- 18 inch (460 mm) long excursion direct radiating driver
- Omni-directional or cardioid radiation modes (cardioid setup requires min. 2 units)
- Selectable DEEP™ mode for extremely low frequency extension
- Adjustable crossover and delay
- Scenes for commonly-used applications that can be saved/recalled
- Refined, professional and elegant appearance in any application
- Rugged painted wood enclosure for lasting durability
- Vertical or horizontal deployment (M20 threaded pole receiver for vertical setup)
- Four low-noise, heavy-duty casters
- Optional transport cover, KS-LOC security cover and 35 mm loudspeaker pole accessories available
- 6-Year Warranty with product registration
The KS118 is a very high output active subwoofer producing impressive low frequencies for mobile entertainment, AV production, clubs and performance venues. Featuring an 18-inch direct radiating driver powered by a 3600 Watt Class D amplifier, the KS118 delivers high sound pressure levels with dynamic and musical sound reproduction of very low frequencies.
On-board DSP optimizes and protects system performance as well as offers advanced capabilities such as the ability to array two units in a cardioid arrangement. Highly transportable, the rugged enclosure features comfortable handles and four low noise casters. An M20 threaded pole receptacle accepts a 35 mm pole for easy vertical deployment with full-range loudspeakers.
SPECIFICATIONS
KS118
Configuration
Direct Radiating
LF Transducer
460 mm (18 in), Cone
Frequency Response (-6 dB)
41 Hz – 98 Hz
Frequency Range (-10 dB)
35 Hz – 111 Hz
Nominal Coverage Angle
Omni-directional or cardioid radiation modes (cardioid setup requires min. 2 units)
Maximum Rated SPL1
136 dB @ 1 m (peak)
Amplifier
Class D
3600W (peak)
Cooling
Low-noise, variable speed fan
Controls
Power On/Off
Gain Control
Rotary encoder
2 × selection buttons
Indicators
2 × Power LED (front and rear)
Input Signal LED
Limiter active LED
Connectors
2 × locking XLR/F ¼ inch combo
2 × XLR/M (Loop-thru Output)
1 × locking IEC power connector
AC Power Input
Universal power supply 100 – 240 VAC, 50 – 60 Hz
AC Power Consumption (⅛ power)
100 VAC, 3.6 A / 120 VAC, 3.0 A / 240 VAC, 1.7 A
Enclosure Details
Enclosure
18 mm birch plywood
Color
Black (RAL 9011)
Grille
16-gauge Black Powder Coated Steel
Speaker Dimensions (H×W×D)
640 × 520 × 785 mm
25.2 × 20.5 × 30.9 in
Carton Dimensions (H×W×D)
572 × 743 × 896 mm
22.5 × 29.3 × 35.3 in
Net Weight
47 kg / 104 lb (including casters)
Shipping Weight
56.5 kg / 124.6 lb
Regulatory
CE, WEEE, UL, China RoHS, RoHS II, FCC Class B
Included Accessories
4 × Low-Noise, Heavy Duty Casters
Optional Accessories
KS118 CVR Transport Cover, KS-LOC Lock-Out Cover
SP-26 and SP-36 Loudspeaker Poles, SP-16X Extension Pole
1 Peak SPL is measured on-axis at 1m, pink noise crest factor 10dB, unweighted Continuous SPL is based on theoretical calculations based upon transducer sensitivity and peak available power (for comparison purpose and in accordance with common industry practice.
With product registration. Visit QSC.com for full details
All specifications are subject to change without notice.
Alvarez LJ2CESHB Little Jumbo travel guitar in Shadowburst Gloss with cutaway and SYS250 EQ/tuner with gig bag
Demand of small body acoustic guitars never seems to slow. They’re great for travel, hitting the beach or lazing around the house. With a few tweaks and careful design, you can make small body guitars sound fantastic and much louder and balanced than one may think.
The LJ2 is a fantastic ‘Little Jumbo’ with great projection and balance. It’s made with high-grade solid Sitka top and is carefully designed to get the best from its small body while staying clear and balanced. Many smallbodied guitars will have a ‘tubby’ or ‘muddy’ voicing. We’ve managed to give the voice clarity, balance and volume, making it a really fun instrument to play.
Now available with a cutaway and in our flawless Shadowburst finish. The LJ2CESHB is fitted with the SYS250 EQ with backlit tuner and ships with our AGB15 deluxe Alvarez gigbag.
ALVAREZ ARTIST
LJ2CESHB
LITTLE JUMBO TRAVEL ACOUSTIC ELECTRIC
KEY FEATURES
Series:Alvarez Artist
Top Wood: Solid A+ Sitka Spruce
Back & Sides:Wood: Arched Mahogany
Shape: Little Jumbo
Neck: Mahogany, 50/50 Semi gloss finish
Bridge: Engineered Rosewood
Fingerboard: Engineered Rosewood
Nut & Saddle: Real Bone
Tuner: Chrome Die Cast
Binding: Ivory ABS
Bridge Pins: PPS Synthetic Bone
Strings: D’Addario EXP16
Accessory: 15mm duo-foam deluxe gig bag
Pickup / EQ: SYS250 EQ with Backlit Tuner
Right-On WIRELESS POCKET Leather pocket-Attaches to your guitar strap or belt-Great for your wireless guitar transmitter-Brown
The WIRELESS Pocket. If you need freedom to move and have a wireless transmitter for your guitar or bass, you have the Wireless pocket. You can put the transmitter pouch in the back of your strap The WIRELESS Pocket fits well in 7cm-8cm wide straps or can be placed horizontally on the adjustable part of the strap using the “belt” pin; the elastic ribbon is 6’5 cm wide. The WIRELESS Pocket is made of high quality bovine leather, and is avaiable in different colors.
The wireless Pocket is now suitable to attach to your belt on your pants as well.