Joyo MA-10E Portable Electric Guitar Amp
MA-10 series is specially designed for different instruments, MA-10E: amp for electric guitar
MA-10 series features various tones. Each model has dual channel dedicated for the related instruments, therefore you can switch easily:
MA-10E: Switchable Clean / OD dual channel With built-in OD channel, perfect for the mainstream metalcore genre.
MA-10 series is compact and portable. There are 2 hidden shoulder strap buckles on both sides of the amp, you can hang the shoulder strap on the buckles when
fully rotate the 2 buckles.
High quality Aux In Jack for playing backing track, 3.5mm stereo Headphone Output Jack, ensuring subtleness of music and interference-free.
5 inches customized full frequency speakers, with rated power of 10W(RMS), full frequency speakers dedicated for the related instruments.
Different power supply modes, you can use the attached power adapter or 6xAA batteries, about 3hrs battery life with AA alkaline batteries.
Innovative logo. The logo of MA-10 series will light when it’s switched on.
On-Stage DB1000 Active Phantom powered Mono DI Box
Our DB1000 Active DI Box converts any high-impedance 1/4″ source to a low-impedance XLR signal ready to send via a long cable run to a mixer or PA system. Features include a -15 dB pad switch to prevent clipping, a throughput connector to pass unaltered signal to a stage amp, and a ground-lift switch to defeat ground-loop hum. Its heavy-duty metal enclosure protects the internal components and ensures reliable performance.
Application Acoustic guitars, bass guitars, keyboards, and more
Inputs 1/4″
Output XLR
Power Phantom
Pad 15dB
Ground Lift Yes
Input Resistance 220K Ohms
Frequency Response 10Hz – 40kHz
Construction Metal w/ nylon bumpers
Dimensions 6″ x 3.5″ x 1.5″
Weight 0.70 lbs.
On-Stage DB500 Passive Direct Box
Our DB500 Passive DI Box converts any high-impedance 1/4″ source to a low-impedance XLR signal ready to send via a long cable run to a mixer or PA system. Features include low-distortion passive circuitry that doesn’t require power, a -20 dB or -40 dB pad switch to prevent clipping, a ground-lift switch to defeat ground-loop hum, and a throughput connector to pass unaltered signal to a stage amp. Its heavy-duty metal enclosure protects the internal components and ensures reliable performance.
Application Acoustic guitars, bass guitars, keyboards, and more
Inputs 1/4″
Output XLR
Power Passive/not required
Pad 20dB, 40dB, Ground Lift: Yes
Input Impedence 350K Ohms
Output Impedence 80 Ohms
Construction Metal
Dimensions (W)4.75″ x (H)1.375″ x (D)2.875″
Weight 0.5 lbs.
On-Stage MSA5050 Clamp-On Drink Holder
Don’t let a spill spoil your session. Keep drinks off amps, keyboards, and the floor with our convenient MSA5050 Clamp-on Drink Holder. Its clamp securely mounts to mic stands and booms to provide a safe place to store beverages. The insulated cup holder helps keep drinks hot or cold and prevents condensation from dripping on your gear.
Application Cup holder for stands
Inside Cup Diameter 3-3.25″
C-Clamp 0.5″-1″
Material Neoprene
Color Black
On-Stage RS6000 Foldable Tilt-Back Amp Stand
Our RS6000 Foldable Tilt-Back Amp Stand angles an amp speaker upward to direct sound toward the listener while reducing floor reflections. The heavy-duty frame holds an amp weighing up to 120 lb securely in place and rests on nonslip feet that reduce vibrations. Light-weight and portable, the stand folds flat and locks in the folded configuration for convenient, compact storage and transportation.
Applications: Medium to large amps
Weight Capacity: 120 lbs.<
Upper Back Arm Length: 18”
Lower Arm Length: 12”
Floor Dimensions: (w)14” x (d)21.5”
Construction: All-Steel
Tubing: 3/4”
Color: Black Powder Coat Finish
On-Stage MDT2 Double-Braced Drum Throne
Our MDT2 Double-Braced Drum Throne features a soft yet dense seat cushion that delivers long-lasting comfort and support, while its splayed, sturdy legs with nonslip rubber feet provide exceptional stability. The height-adjustable base enables ergonomic positioning for a variety of playing styles and folds flat for efficient storage and transportation.
Seat Dimensions 11″ Diameter; 2.4″ thick
Height Adj. 7 Notches adjust from 17.5″ – 24.4″
Base Spread 18.11″
Material Foam cushion covered in a durable flame retardant leather-textured material; Solid Steel; Rubber feet
Color Chrome and black