QSC KW153 3-way powered loudspeaker with a 15″ LF, 6.5″ MF and a 1.75″ diaphragm compression driver
QSC KW153 3-way powered loudspeaker with a 15″ LF, 6.5″ MF and a 1.75″ diaphragm compression driver
Features
- 15-inch woofer; 6.5-inch midrange woofer; 1.75-inch diaphragm compression driver
- 75° conical DMT coverage
- Maximum SPL 134 dB peak
- 1000-watt Class D power modules in all models (2 × 500 W continuous)
- Onboard mixer with two combo XLR and ¼⁻ᶦⁿᶜʰ inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
- Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance
- DMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound field
- Rugged, texture-painted birch enclosures
- Four-position Mic/Line gain
- Tour-grade 16 gauge steel grilles
- Comfortable ergonomic handles
- 35 mm standard (non-tilt) pole socket
- M10 rigging points for suspended installation
SPECIFICATIONS
KW153
Configuration
15-inch 3-way trapezoidal
Transducers
Low-frequency
Mid-frequency
High-frequency
15-inch cone transducer
6.5-inch mid range cone transducer
1.75-inch diaphragm compression driver
Frequency Response (-6 dB)
35 Hz to 18 kHz
Frequency Range (-10 dB)
33 Hz to 20 kHz
Nominal Coverage (-6 dB)
75° axisymmetric
Maximum SPL1
134 dB peak
Amplifier
Power Output2
1000 W Class D (500 W LF + 500 W MF/HF) continuous
2000 W peak
Input Impedance
Channel A XLR / ¼⁻ᶦⁿᶜʰ:
Mic gain setting
Balanced
Unbalanced
0 dB
38 kΩ
19 kΩ
+12 dB
10 kΩ
5 kΩ
+24 dB
2.66 kΩ
1.33 kΩ
+36 dB
660Ω
330Ω
Channel B XLR / ¼⁻ᶦⁿᶜʰ: 38 kΩ balanced / 19 kΩ unbalanced
Channel B RCA: 10 kΩ
Controls
Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators
Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
Connectors
Balanced female XLR/¼⁻ᶦⁿᶜʰ line/mic level input, Balanced female XLR/¼⁻ᶦⁿᶜʰ line level input, Dual Balanced male XLR full range line level out , Balanced male XLR “mix” out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling
On demand, 50 mm variable speed fan
Amplifier Protection
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection
Thermal limiting, excursion limiting
AC Power Input
Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption
(1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material
15 mm painted birch plywood
Finish
Black textured paint
Grille
Black powder coated 16 gauge steel
Speaker Dimensions (H×W×D)
1094 × 470 × 427 mm
43.1 × 18.5 × 16.8 in
Carton Dimensions (H×W×D)
580 × 560 × 1168 mm
22.8 × 22 × 46 in
Net Weight
39.5 kg / 87 lb
Shipping Weight
47.6 kg / 104.9 lb
Available Accessories
KW153 cover, KW M10 kit
All specifications are subject to change without notice.
QSC KS118-COVER Nylon padded cover with grill guard for KS118.
Features
Soft cover made with heavy-duty Nylon/Cordura® material for the KS118 with grille guard.
QSC KS118 18″ powered subwoofer with four (4) heavy-duty casters.
Features
- Very high output with impressive low frequency performance
- 3600 Watt Class D amplifier module
- 18 inch (460 mm) long excursion direct radiating driver
- Omni-directional or cardioid radiation modes (cardioid setup requires min. 2 units)
- Selectable DEEP™ mode for extremely low frequency extension
- Adjustable crossover and delay
- Scenes for commonly-used applications that can be saved/recalled
- Refined, professional and elegant appearance in any application
- Rugged painted wood enclosure for lasting durability
- Vertical or horizontal deployment (M20 threaded pole receiver for vertical setup)
- Four low-noise, heavy-duty casters
- Optional transport cover, KS-LOC security cover and 35 mm loudspeaker pole accessories available
- 6-Year Warranty with product registration
The KS118 is a very high output active subwoofer producing impressive low frequencies for mobile entertainment, AV production, clubs and performance venues. Featuring an 18-inch direct radiating driver powered by a 3600 Watt Class D amplifier, the KS118 delivers high sound pressure levels with dynamic and musical sound reproduction of very low frequencies.
On-board DSP optimizes and protects system performance as well as offers advanced capabilities such as the ability to array two units in a cardioid arrangement. Highly transportable, the rugged enclosure features comfortable handles and four low noise casters. An M20 threaded pole receptacle accepts a 35 mm pole for easy vertical deployment with full-range loudspeakers.
SPECIFICATIONS
KS118
Configuration
Direct Radiating
LF Transducer
460 mm (18 in), Cone
Frequency Response (-6 dB)
41 Hz – 98 Hz
Frequency Range (-10 dB)
35 Hz – 111 Hz
Nominal Coverage Angle
Omni-directional or cardioid radiation modes (cardioid setup requires min. 2 units)
Maximum Rated SPL1
136 dB @ 1 m (peak)
Amplifier
Class D
3600W (peak)
Cooling
Low-noise, variable speed fan
Controls
Power On/Off
Gain Control
Rotary encoder
2 × selection buttons
Indicators
2 × Power LED (front and rear)
Input Signal LED
Limiter active LED
Connectors
2 × locking XLR/F ¼ inch combo
2 × XLR/M (Loop-thru Output)
1 × locking IEC power connector
AC Power Input
Universal power supply 100 – 240 VAC, 50 – 60 Hz
AC Power Consumption (⅛ power)
100 VAC, 3.6 A / 120 VAC, 3.0 A / 240 VAC, 1.7 A
Enclosure Details
Enclosure
18 mm birch plywood
Color
Black (RAL 9011)
Grille
16-gauge Black Powder Coated Steel
Speaker Dimensions (H×W×D)
640 × 520 × 785 mm
25.2 × 20.5 × 30.9 in
Carton Dimensions (H×W×D)
572 × 743 × 896 mm
22.5 × 29.3 × 35.3 in
Net Weight
47 kg / 104 lb (including casters)
Shipping Weight
56.5 kg / 124.6 lb
Regulatory
CE, WEEE, UL, China RoHS, RoHS II, FCC Class B
Included Accessories
4 × Low-Noise, Heavy Duty Casters
Optional Accessories
KS118 CVR Transport Cover, KS-LOC Lock-Out Cover
SP-26 and SP-36 Loudspeaker Poles, SP-16X Extension Pole
1 Peak SPL is measured on-axis at 1m, pink noise crest factor 10dB, unweighted Continuous SPL is based on theoretical calculations based upon transducer sensitivity and peak available power (for comparison purpose and in accordance with common industry practice.
With product registration. Visit QSC.com for full details
All specifications are subject to change without notice.
Alvarez LJ2CESHB Little Jumbo travel guitar in Shadowburst Gloss with cutaway and SYS250 EQ/tuner with gig bag
Demand of small body acoustic guitars never seems to slow. They’re great for travel, hitting the beach or lazing around the house. With a few tweaks and careful design, you can make small body guitars sound fantastic and much louder and balanced than one may think.
The LJ2 is a fantastic ‘Little Jumbo’ with great projection and balance. It’s made with high-grade solid Sitka top and is carefully designed to get the best from its small body while staying clear and balanced. Many smallbodied guitars will have a ‘tubby’ or ‘muddy’ voicing. We’ve managed to give the voice clarity, balance and volume, making it a really fun instrument to play.
Now available with a cutaway and in our flawless Shadowburst finish. The LJ2CESHB is fitted with the SYS250 EQ with backlit tuner and ships with our AGB15 deluxe Alvarez gigbag.
ALVAREZ ARTIST
LJ2CESHB
LITTLE JUMBO TRAVEL ACOUSTIC ELECTRIC
KEY FEATURES
Series:Alvarez Artist
Top Wood: Solid A+ Sitka Spruce
Back & Sides:Wood: Arched Mahogany
Shape: Little Jumbo
Neck: Mahogany, 50/50 Semi gloss finish
Bridge: Engineered Rosewood
Fingerboard: Engineered Rosewood
Nut & Saddle: Real Bone
Tuner: Chrome Die Cast
Binding: Ivory ABS
Bridge Pins: PPS Synthetic Bone
Strings: D’Addario EXP16
Accessory: 15mm duo-foam deluxe gig bag
Pickup / EQ: SYS250 EQ with Backlit Tuner
Right-On WIRELESS POCKET Leather pocket-Attaches to your guitar strap or belt-Great for your wireless guitar transmitter-Brown
The WIRELESS Pocket. If you need freedom to move and have a wireless transmitter for your guitar or bass, you have the Wireless pocket. You can put the transmitter pouch in the back of your strap The WIRELESS Pocket fits well in 7cm-8cm wide straps or can be placed horizontally on the adjustable part of the strap using the “belt” pin; the elastic ribbon is 6’5 cm wide. The WIRELESS Pocket is made of high quality bovine leather, and is avaiable in different colors.
The wireless Pocket is now suitable to attach to your belt on your pants as well.
Right-On WIRELESS POCKET Leather pocket-Attaches to your guitar strap or belt-Great for your wireless guitar transmitter-Black
The WIRELESS Pocket. If you need freedom to move and have a wireless transmitter for your guitar or bass, you have the Wireless pocket. You can put the transmitter pouch in the back of your strap The WIRELESS Pocket fits well in 7cm-8cm wide straps or can be placed horizontally on the adjustable part of the strap using the “belt” pin; the elastic ribbon is 6’5 cm wide. The WIRELESS Pocket is made of high quality bovine leather, and is avaiable in different colors.
The wireless Pocket is now suitable to attach to your belt on your pants as well.
Dunlop JD925 Ergo Tone Bar
This ergonomically designed chromed brass tonebar fits the three primary playing fingers, giving more comfort and better control.
Chromed Brass – 5.35 oz. 5/8 diameter x 2-7/8 long.
Aquila 21U New Nylgut Baritone Ukulele Strings (DGBE Tuning)
Made for low D tuning (DGBE, bass side to treble side), these Baritone ukulele strings are New Nylgut, with one aluminum wound and one silver-plated copper wound.
Aquila 89u Red Series Baritone Ukulele Set-Low D
Aquila RED Baritone Ukulele Strings Ukulele DGBE Tuning (G & D wound) 89U, Full Set of Ukulele Strings
Starting with Nylgut, Aquila adds red copper powder to increase the density of the string to almost twice as much as standard white Nylgut. This results in a stiffer string capable of lower tunings, less breakage and better intonation. Filing of the nut slot may be required.
IMPORTANT:
To avoid potential problems, please make sure the string slot in the nut is wide enough. This is easily determined by putting the string in the slot and visually checking the fitment before installing the string. A radiused lower edge at the fingerboard side is also very important. Some ukes have a sharp lower edge. These strings are very reliable under correct conditions.
Aquila 23U Baritone Ukulele Strings-High G (CGEA)
Aquila 23U Baritone Ukulele Strings are make of Nylgut, a synthetic material that stays in tune and gives you accurate fret intonation. With a density similar to natural gut, Nylgut delivers a gut-like sound but remains stable when subjected to changes in humidity.
Features:
- High G Tuning
- Regular GCEA tuning
- All Nylgut set
Dunlop 920 Stainless Steel Tonebar Item
Description
Round nose tonebars for pedal steel, Dobro and Hawaiian-type guitars. Made of high-quality stainless steel for long life. The 918 Professional was Designed specifically for Jerry Byrd, Premier Hawaiian Guitar Player.
Shubb SHUBB-GS1 Guitar Steel Bar Slide
A bold and brilliant step in the evolution of the guitar steel. Its handle is crafted of fine hardwood for optimum comfort and control; the playing surface is machined of stainless steel for maximum durability.
The GS Steel represents the most significant step yet in the evolution of the guitar steel.
- The stainless steel edge is designed for clean pulloffs.
- The wood grain provides a good grip for best control.
- The hardwood handle is weighted for proper balance.
- The contoured top allows your hand to be in a relaxed, natural position.
At first it may seem like a gimmick …not what you’re used to. But when you think about it for a few minutes, and especially after you try one, it really makes sense!
That’s what I thought when I first saw a picture of Gary Swallows’ new concept in guitar steels at the Nashville NAMM show in July of 2002. My first reaction was that players would not accept it because it was too different. But when I met Gary, and he let me handle some of his beautiful hand made bars, I immediately realized that the pictures didn’t do them justice. These things look and FEEL so nice that someone would want to own one whether they play an instrument or not. Within minutes I became a believer in the concept of a guitar steel made of two materials: wood for the handle, and stainless steel for the playing surface.
We spent quite awhile talking about his bars, and I learned just how much thought and care he had put into their development. The history of guitar steels has been an evolution away from the “found object” towards a more specialized, ergonomic tool. I soon realized that he had made not only the next step in that evolution, but the next two or three steps at once. Besides his creative use of materials, he had sculpted the shape of the tops of his bars so that your hand lays on them in the most amazingly relaxed and natural position. He had carefully considered every angle, every surface, every radius. From its edge, designed to deliver the clean pulloffs that today’s players love, to the weighted, counterbalanced handle, this bar is about as far from a “found object” as you can get.
Before we left Nashville, I told Gary that I was interested in becoming involved in the production and marketing. Shortly thereafter he sent us some prototypes. Now it was our turn to get to work. Our job was to devise production techniques which would not compromise the attention to detail that Gary had given each bar that came out of his workshop. Collaborating closely with Gary on a couple of design refinements (we always have to put our own touch onto these things), the GS1 was born.
Dunlop JD218 Glass Short/Medium Slide
DESCRIPTION
This glass slide provides a warm, thick tone that accentuates the middle harmonics of your sound, featuring heavy wall thickness and a medium diameter.
Dunlop 926 Lap Dawg Tonebar
This chromed brass tonebar features a larger radius for added sustain and vibrato, a re-designed body for a more comfortable grip, and new side angles.
The Lap Dawg Tonebar is designed for progressive players, featuring a larger radius for added sustain and vibrato, a re-designed body for a more comfortable grip, and new side angles. It delivers better speed and clarity for hammer-ons and pull-offs.
Chromed Brass – 5.1 oz. 3/4 diameter x 2.85 long.
Shubb SP2 Guitar Steel Slide – Stainless Steel
Guitar Steel SP2
Its design suggested by Peter Grant, the extra mass (for tone) and double cutaway (for control) make this a versatile bar for various styles of resophonic and lap steel guitar. 5.8 oz.
Our guitar steels are designed by musicians with the special demands of today’s playing styles in mind. They offer unique design features not found on any other bars, including cutaway ends for improved control, and a semi-bullet tip which facilitates movement across the strings.
Solid Stainless Steel
• Resists nicks and scratches far better than a plated bar.
And if it ever should get a nick or scratch, it can be buffed out, unlike a plated bar.
• No plating to wear off.
Any plated bar will wear down, and people end up replacing them. A stainless bar will remain as good as new indefinitely — outlasting a drawer full of worn out plated bars.
• An incredible value at its price.
Solid stainless steel bars typically cost double the price of the SP or RR steel.
It is a change we have long been considering. It is a significant product upgrade, plus it makes sense on other levels. Quality control problems have increased over the years, as plating shops must comply with higher standards in their use of chemicals and disposal of waste. No one wants to come down on the wrong side of an environmental issue, and while stainless steel might not leap to mind as a stereotypical green solution, in this case it is. By moving away from plating on this product, we are endeavoring to be part of the solution rather than part of the problem.
Dunlop JD919 Stainless Steel 4.5 Oz Tone Bar
- For pedal steel, Dobro and Hawaiian-type guitars
- Made of high-quality stainless steel for long life
- Stainless Steel
- 4.5 ounces – 3/4″ diameter X 2-3/4″ length
- MADE IN THE USA
Round nose tonebar for pedal steel, Dobro and Hawaiian-type guitars. Made of high-quality stainless steel for long life.