AKG C3000 High-Performance Large-Diaphragm Condenser Microphone
The C3000 high-performance, large-diaphragm condenser microphone has been a standard for live applications and studio recording for almost two decades. It is an excellent choice for vocals, electric and acoustic guitars, drum overhead and brass instrument miking. The switchable attenuation pad and low-cut filter enable high SPL up to 150dB and eliminate proximity effect.
The redesigned C3000 presents itself as a cost-effective, rugged workhorse with a sleek and classy finish.
General Specifications
Polar PatternCardioid
Audio frequency bandwidth20 – 20000 Hz
Maximum SPL150 dB
Equivalent noise level14 dB-A
Sensitivity20 mV/Pa
Signal to Noise> 80 dB-A
Preattenuation Pad-10 dB
Bass cut filter500 Hz, 6dB/octave
Electrical impedance< 200 Ohms
Recommended load impedance> 1000 Ohms
Dimensions
Height162 mm
Width53 mm
Diameter19 mm
Net Weight320 g
Design
Finishblack
Audio Output
TypeBalanced XLR
GenderMale
Contacts3-pin
Powering Interface
Voltage9 to 52 V, 2mA
Current2 mA
Instrument
Guitar Amps / Bass AmpsYes
Drums / PercussionYes
Horns / WoodwindsYes
Piano / StringsYes
VocalsYes
COOL Beta Carbonate Thumb Pick-Medium
Project Description
WITH A “COOLCELL RUBBERIZED GRIP ™
100% CELLULOID AND THE DISPLAY COMES WITH 300 PICKS
ACROSS THE 3 MOST POPULAR GAUGES.
0.50, 0.75, 1.00
COOLCELL® RUBBERIZED ACCU-GRIP PICK ™
For many years, celluloid has been the choice of guitarists worldwide. Most have used them in a dark tortoise shell color with a popular guitar manufacturer’s logo on it. Our COOLCELLpicks are made of 100% celluloid in a white mother of pearl shell coloring. Our goal was to make a celluloid pick which would offer the guitarist as much gripping power
as they need at any time during a performance. Not too little, not too much, but just enough without getting in the way.
We at cool music know that no two guitarists are alike and that is why the revolutionary COOLCELL Rubberized Accu-Grip™ pick was created. It is truly a smart guitar pick. This pick design actually will change its gripping texture to give the dry, wet, or even slimy fingered guitarist the proper grip at all times. No matter how bad your flop-sweat or nerves on that special gig may be, you will not lose your pick while playing those super fast cool lead lines.
If you are now playing another celluloid pick, you owe it to yourself to… “TRY THIS PICK”!!!
It is important for you to realize that this pick will actually change its feel dynamically as you need it! While you play!
That is, if you start playing dry and end your song or set with moist fingers the pick will get grippier as you need it.
Now that’s cool!
The Secret:
This pick’s texture is a micro-porous and slightly nubby heat sensitive rubberized compound. This patented compound mixture is applied to the pick using a special cryogenic process. This application process allows the COOLCELL™ pick to successfully morph from a very smooth slightly nubby surface (cool environments) to a very grippy softer and stickier grip (hot or wet environments) This cryo- process allows the pick to continue to change from hot to cold and back again without distorting the nubby texture or compromising the overall sound of the pick.
COOL Beta Carbonate Thumb Pick-Large
Project Description
WITH A “COOLCELL RUBBERIZED GRIP ™
100% CELLULOID AND THE DISPLAY COMES WITH 300 PICKS
ACROSS THE 3 MOST POPULAR GAUGES.
0.50, 0.75, 1.00
COOLCELL® RUBBERIZED ACCU-GRIP PICK ™
For many years, celluloid has been the choice of guitarists worldwide. Most have used them in a dark tortoise shell color with a popular guitar manufacturer’s logo on it. Our COOLCELLpicks are made of 100% celluloid in a white mother of pearl shell coloring. Our goal was to make a celluloid pick which would offer the guitarist as much gripping power
as they need at any time during a performance. Not too little, not too much, but just enough without getting in the way.
We at cool music know that no two guitarists are alike and that is why the revolutionary COOLCELL Rubberized Accu-Grip™ pick was created. It is truly a smart guitar pick. This pick design actually will change its gripping texture to give the dry, wet, or even slimy fingered guitarist the proper grip at all times. No matter how bad your flop-sweat or nerves on that special gig may be, you will not lose your pick while playing those super fast cool lead lines.
If you are now playing another celluloid pick, you owe it to yourself to… “TRY THIS PICK”!!!
It is important for you to realize that this pick will actually change its feel dynamically as you need it! While you play!
That is, if you start playing dry and end your song or set with moist fingers the pick will get grippier as you need it.
Now that’s cool!
The Secret:
This pick’s texture is a micro-porous and slightly nubby heat sensitive rubberized compound. This patented compound mixture is applied to the pick using a special cryogenic process. This application process allows the COOLCELL™ pick to successfully morph from a very smooth slightly nubby surface (cool environments) to a very grippy softer and stickier grip (hot or wet environments) This cryo- process allows the pick to continue to change from hot to cold and back again without distorting the nubby texture or compromising the overall sound of the pick.
COOL MV1 Studio Condenser Microphone
Project Description
WITH A “COOLCELL RUBBERIZED GRIP ™
100% CELLULOID AND THE DISPLAY COMES WITH 300 PICKS
ACROSS THE 3 MOST POPULAR GAUGES.
0.50, 0.75, 1.00
COOLCELL® RUBBERIZED ACCU-GRIP PICK ™
For many years, celluloid has been the choice of guitarists worldwide. Most have used them in a dark tortoise shell color with a popular guitar manufacturer’s logo on it. Our COOLCELLpicks are made of 100% celluloid in a white mother of pearl shell coloring. Our goal was to make a celluloid pick which would offer the guitarist as much gripping power
as they need at any time during a performance. Not too little, not too much, but just enough without getting in the way.
We at cool music know that no two guitarists are alike and that is why the revolutionary COOLCELL Rubberized Accu-Grip™ pick was created. It is truly a smart guitar pick. This pick design actually will change its gripping texture to give the dry, wet, or even slimy fingered guitarist the proper grip at all times. No matter how bad your flop-sweat or nerves on that special gig may be, you will not lose your pick while playing those super fast cool lead lines.
If you are now playing another celluloid pick, you owe it to yourself to… “TRY THIS PICK”!!!
It is important for you to realize that this pick will actually change its feel dynamically as you need it! While you play!
That is, if you start playing dry and end your song or set with moist fingers the pick will get grippier as you need it.
Now that’s cool!
The Secret:
This pick’s texture is a micro-porous and slightly nubby heat sensitive rubberized compound. This patented compound mixture is applied to the pick using a special cryogenic process. This application process allows the COOLCELL™ pick to successfully morph from a very smooth slightly nubby surface (cool environments) to a very grippy softer and stickier grip (hot or wet environments) This cryo- process allows the pick to continue to change from hot to cold and back again without distorting the nubby texture or compromising the overall sound of the pick.
RØDE NT1 5th Generation Studio Condenser Microphone
The RØDE NT1-A 1″ cardioid condenser microphone has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability typically only featured on some of the world’s most expensive microphones.
With a self-noise level of only 5dBA it is widely recognized (along with the NT1) as one the world’s quietest studio microphones. This low noise makes it an ideal vocal microphone as well as perfect for recording guitars and percussion.
Packaged in the ‘Complete Vocal Recording Solution’, the NT1-A includes everything you need to get a truly professional vocal recording and is ideal for home studio recording.
A studio grade pop shield and shock mount is included, along with a premium 20′ microphone cable, dust cover, and an downloadable instructional video packed with recording tips.
The RØDE NT1-A large diaphragm 1″ cardioid condenser microphone is designed and made in Australia, and covered by RØDE Microphones’ industry leading 10 year warranty.
https://youtu.be/oOy0EglZPRY
Rode NT1 Kit 1″ Cardioid Condenser Microphone-includes NT1 and SM6 shock mount.
The NT1 is a revolutionary new 1″ diaphragm condenser microphone from RØDE.
Although the body of the new NT1 closely resembles the NT1-A, the microphone has been completely redesigned from the ground up, with the only shared component being the mesh grille.
RØDE’s design engineers approached the NT1 as a marriage of innovation and tradition, starting with the capsule which is a completely new design. Codenamed the HF6, it is the perfect example of RØDE’s fusion of artistic design approaches and cutting-edge manufacturing techniques, and features a sound signature reminiscent of the famous microphones of old while at the same time exhibiting extremely low noise.
It has been developed with a focus on detailed midrange response, coupled with silky smooth high frequencies, and warm, round, bass reproduction to make the NT1 an absolute standout in its class.
In another world-first for RØDE, the transducer itself is suspended inside the microphone using Rycote’s industry-leading Lyre system, minimizing external vibrations at the capsule level. The capsule is then married to high-grade electronics that have been designed to provide the lowest noise level of any studio microphone available. The NT1 is an incredibly quiet microphone, measuring only 4.5dBA of self-noise.
Its body is machined from 6061 aluminium and then nickel plated for resistance against corrosion. Finally it is coated in a durable, military-grade ceramic layer, using advanced electrostatic application techniques developed by RØDE to ensure an extremely hard wearing finish that is resistant to scratches or marks.
The NT1 is supplied with the SM6, a high-quality suspension shockmount that provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. It includes a removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility.
The NT1 is designed and made in Australia, and is covered by RØDE’s industry-leading 10 year warranty.
- Large diaphragm 1” gold-sputtered capsule
- Cardioid polar pattern
- Internal capsule shock mounting system
- Ultra-low noise, self noise of only 4.5dB (A)
- State-of-the-art surface mount electronics
- 10 year extended warranty when you register your microphone
https://youtu.be/PwOYTt7Y-Uc
NT1 SPECIFICATIONS
Acoustic Principle
Pressure Gradient
Active Electronics
JFET impedance converter with bipolar output buffer
Capsule
1.00″
Polar Pattern
Address Type
Side
Frequency Range
20Hz – 20kHz
Output Impedance
100Ω
Maximum SPL
132dBSPL
Maximum Output Level
8.0mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity
-29.0dB re 1 Volt/Pascal (35.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)
4dBA
Power Options
Weight
440.00g
Dimensions
187.00mmH x 50.00mmW x 50.00mmD
Output
Warranty
1 year with free extension to 10 years
Rode NT3 Multi-powered 3/4″ cardioid condenser microphone. P48 and 9V battery powered.
The NT3 is the definition of a studio workhorse. Featuring an end-address 3/4″ gold-sputtered true-condenser transducer it provides incredible detail on almost any instrument you can imagine.
Intended for studio, stage and location work, this versatile handheld, stand or boompole mounted microphone will give great results on drums, percussion, acoustic guitar, guitar amps, piano and all acoustic instruments as well as detailed voice reproduction when used as a handheld presentation microphone or indoor boom mic.
For further versatility the NT3 can be powered by either P48 phantom power, or via a 9V battery for situations when power isn’t available via the console or camera. Its rugged and durable all-metal body and mesh head ensure that it is well protected both in the studio and out in the field.
The RØDE NT3 microphone is designed and made in Australia, and covered by RØDE’s industry leading 10 year warranty.
- True condenser externally biased 3/4” capsule
- Dual power operation
- Cast metal body with durable satin-nickel finish
- Transformerless output
- Internal capsule shock mounting
- High level of RF rejection
- Audio-grade surface mount components
- Full frequency response
- 10 year extended warranty when you register your microphone
NT3 SPECIFICATIONS
Acoustic Principle
Pressure Gradient
Active Electronics
JFET impedance converter with bipolar output buffer
Capsule
0.75″
Polar Pattern
Address Type
End
Frequency Range
20Hz – 20kHz
Output Impedance
200Ω
Maximum SPL
140dBSPL
Maximum Output Level
9.5mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity
-39.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)
16dBA
Power Options
Weight
371.00g
Dimensions
206.00mmH x 32.00mmW x 32.00mmD
Output
Warranty
1 year with free extension to 10 years
Lewitt LCT 040P MATCH Matched Stereo Pair Condenser Microphones
Your mic for easy instrument recordings.
You want professional sound right from the moment you hit “record”? With the LCT 040 MATCH recording instruments is as easy as it gets. Its tried and tested small diaphragm condenser capsule provides well-balanced sound with a pleasant high-end. The excellent transient response retains the natural musicality of your acoustic instruments – quick results with zero hassle.
The LCT 040 MATCH is a great tool to get recording work done in no time. You still have to perform well, though.
Well-balanced sound with pleasant high-end
With this sound, you’ll hit record right away.
The LCT 040 MATCH provides professionally refined sound, right from the moment you hit the “record” button. After thorough testing and adapting, we tailored the small diaphragm condenser capsule to give you a well-balanced sound with pleasant high-end. You’ll achieve professional results easily.
Made for acoustic guitar recordings
Record the feel of your favorite chord.
With its fast transient response, the LCT 040 MATCH makes your acoustic guitar sound crisp and defined. What you get is a mic for guitar recordings with fast attack and a sound that cuts through the mix.
Made for drum recordings
Capture the feel of your favorite groove.
Transients are the DNA of your instrument’s sound. To retain the natural musicality of your instruments, the LCT 040 MATCH delivers an excellent transient response. The natural characteristics of hi-hat and snare are captured accurately.
You get a punchy and precise reproduction of your drum kit’s unique sound.
Durable and light aluminum housing
Light as a feather it outlives endless tours.
The LCT 040 MATCH is built to last yet it is lightweight thanks to its CNC’ed aluminum housing, weighing only 44 g or 1.6 oz. Together with its space-saving form factor positioning and setup become easy tasks.
Lewitt Audio LCT 440 Pure Condenser Microphone w/Gold-layered 1″ true condenser capsule.
YOUR MIC FOR PURE STUDIO SOUND.
The LCT 440 PURE uses the same high-end components and capsule technology as our prestige models. It features a very low self-noise of 7 dB (A) and handles sound pressure levels up to 140 dBSPL.
You will fall in love with its larger-than-life sound and build quality right away. No doubt about it; this is a mic for life.
SHINES ON VOCALS
The LCT 440 PURE provides larger-than-life vocals. Every detail of your voice is captured by the gold-layered 1″ true condenser capsule.
A shock mount that minimizes structure-borne noise and a magnetic pop filter are included. It perfectly integrates with the design of the microphone.
Amazing sound, great accessories, top-notch recordings.
The LCT 440 PURE achieves class-defining sound.
The 1″ true condenser capsule captures your signal with an impressive amount of depth and clarity. For the LCT 440 PURE, we use the same capsule and circuit design as with our prestige models.
We test every single capsule according to the highest quality standards. This way, you capture your individual personality and all the emotion you’ve put into your performance.
Lewitt Audio LCT 140 AIR Small Diaphragm Condenser Microphone-Matched Pair
Small diaphragm condenser microphoneLCT 140 AIR
- Choose between two distinct sound characteristics
- Great for acoustic guitar and drums
- Excellent transient response
- Cardioid polar pattern
Your mic for both, realistic and sparkling sound.
Do you prefer your instrument sounding 100% natural or rather have some sparkle on top? The LCT 140 AIR can do both. It features two sound characteristics, AIR and FLAT. You can easily switch to the sound that fits your purpose.
AIR adds top-end sparkle, while FLAT reproduces your sound as it is. Try both and capture the performance the way you want.
Two switchable sound characteristics
AIR or FLAT? Record the source the way you want.
AIR delivers an open, sparkling character. The right choice if you need great sound without spending time on post-production. FLAT provides a linear frequency response for “as-it-is” reproduction of drums, strings, acoustic guitars, and choirs. It is perfect if you aim for realistic sonic images. Check out the sound samples and hear for yourself.
Excellent transient response
Capture the natural sound of your instruments.
Transients are the DNA of your instrument’s sound. To retain the natural musicality of your instruments, the LCT 140 AIR delivers an excellent transient response. The natural characteristics of cymbals are captured accurately.
In any case, you get a punchy yet warm reproduction of your instrument’s unique sound.
Durable and light aluminum housing
It’s withstanding and easy to handle.
The LCT 140 AIR is very durable yet lightweight thanks to its CNC’ed aluminum housing. Positioning and setup become easy tasks.